To avoid overloading, your amplifier has to shut down. The outside antenna is pulling in too much signal from the cell tower. This is called a feedback loop or oscillation. Your outside antenna is pulling in signal from your inside antenna instead of the cell tower. Your signal booster is amplifying at maximum capacity. Where can I use this booster?Įverything is working perfectly.
SEPARATION STUDIO PINT KIT FREE
Simply unplug the power supply for 5-10 seconds and replug to reboot the system.Īny questions about installation? Please call us at 1-80 for a free consultation and answers to any other questions you might have. Pro tip: Any post-installation adjustments like re-aiming the Outside Antenna or relocating the amplifier will require a quick reboot. The amplifier will sync up and if you see all green lights, then green means GO! Check your phone near the amplifier to how much better signal you’re getting. Power on: Plug the AC power supply into the Amplifier and then to the wall outlet.Make sure there is at least 20 feet vertical or 50 feet horizontal distance between the two where possible. Pro tip: Having enough separation between the two antennas (outdoor and indoor) prevents oscillation. The nearer the amp/antenna to where you need it, the stronger and more reliable your signal will be. Place Amplifier: Ideally, you should place the weBoost Home Studio as close to where you need the best signal as possible.Pro tip: The amplifier does all the heavy lifting for boosting signal and will get warm. It’s all a matter of preference and aesthetics and where you want to locate the amplifier. Some customers run cable into the attic, others prefer using an optional window-entry cable. Connect to Amplifier: Once the Outside Antenna is mounted, connect the included RG-6 cable to the Outside Antenna and to the “Outside Antenna” port on the amplifier.Aiming toward your nearest cell tower for best results. Place the antenna as high up as possible, either using the window mount or outside your home.
SEPARATION STUDIO PINT KIT INSTALL
SEPARATION STUDIO PINT KIT TV
If you prefer having someone else do the job, you can also contact your local general contractor, electrician, or anyone who’s installed a satellite TV dish. You’ll need some general handyman skills but nothing too specialized. The most "difficult" part is installing the Outside Antenna. Installing any consumer signal booster setup is fairly simple.
0 kommentar(er)
